Long file names can be a serious pain... for copy and backup reasons.

I recall a NTG client that used a long name for the directories,.. and it made updating nearly impossible Should follow the KISS method... Directory names don't need to be 120 characters long,.. and four deep.

@scottalanmiller Try with another separator instead of dash, just to make check if it's the dash or something else. Maybe just remove it altogether.

@pmoncho said in Kerio Connect "license error: license exhausted, cannot allow another host":

Based on the couple posts I have seen, each registered user can have five devices. So, if they have 30 devices, they need 6 user licenses. Did they add any extra devices lately?

Easily, but more likely they just let their license expire.

@CCWTech said in Restoring Google Drive Folders Instead of Individual Files:

Unfortunately what they did ended up orphaning the files.

https://support.google.com/a/answer/6008339?hl=en

Ouch

@Obsolesce said in TrendMicro 10.6:

Is TrendMicro still blocking ML?

No, we run it here and I'm able to access it.

@Pete-S said in Windows: Set screen to blank when locked?:

Sorry, I should have explained more clearly what I'm try to accomplish.

I want to screen to blank, which is what causes the screen to go into power saving mode. Not just setting it to a black color.

Blanking is tech speak for when the graphics adapter would turn of either one or both of the horizontal and vertical sync signals and thereby communicate to the display that the screen is not in use and it can go into one of it's power saving modes.

Lock windows computer =>> screen goes into power save mode right away.
Computer don't go into sleep until it does so by it's normal settings.

So then this might apply to this

8613c050-1e78-4bd2-838f-f3eaf8048bba-image.png

I just had discovered on a recent audit a Barracuda Backup device, but I was able to get the account login for the cloud and local account. I used the email of the previous IT person and the administrator password.

If you don't know the account or password at this point is better to reset and start over or contact Barracuda Technical Support...

@scottalanmiller said in Can I have some inputs on this? - Eqela:

@darrel said in Can I have some inputs on this? - Eqela:

@scottalanmiller said in Can I have some inputs on this? - Eqela:

@RojoLoco said in Can I have some inputs on this? - Eqela:

@scottalanmiller said in Can I have some inputs on this? - Eqela:

@XeL it's been a while. How did your process go of getting into mobile app development?

Looks like the made 2 accounts here, posted a video and link to gather some precious clicks, and then disappeared. Spamtastic.

Might look that way at first glance, but XeL is, I'm pretty sure, someone that some people like @Pol and @Joy know personally.

Yeah, @XeL is one of my devs around 2014. I think his good now, he's been a good iOS dev.

And by the way, can somebody delete my other acocunt? I dont use @Pol anymore. I can't access my credentials when I tried using that account.

No, we can't delete because that would cause all your posts to be disassociated.

You chose not to delete because posts become disassociated.

You easily could.

@slazer2au said in Does VTP update the Description of vlans?:

@Duffney
It takes the vlan database of the server switch with the highest revision and sends it to every other switch in the VTP domain.

Be careful though, VTP is a double edge sword.

As are VLANs themselves! 🙂

Tags added.

@NashBrydges said in Backing up Office 365:

@Dashrender @Jimmy9008 My largest client to use this for their Office 365 backup has 42 mailboxes and it works very well for them. I can't confirm with anything larger than that though.

In theory then it should work well for me. Will test and see. Thanks

@Rick-Vanover from Veeam joined a year after this thread.

For reference, here is the same IVR dialplan as output by FreePBX

asterisk -x "dialplan show ivr-4" [ Context 'ivr-4' created by 'pbx_config' ] '*' => 1. Set(__ivrreturn=0) [extensions_additional.conf:4167] [ivrsel-*] 2. Goto(app-blackhole,hangup,1) [extensions_additional.conf:4168] '0' => 1. Set(__ivrreturn=0) [extensions_additional.conf:4164] [ivrsel-0] 2. Goto(ivr-4,s,1) [extensions_additional.conf:4165] '9' => 1. Set(__ivrreturn=0) [extensions_additional.conf:4170] [ivrsel-9] 2. Goto(um-vm,s,1) [extensions_additional.conf:4171] 'fax' => 1. Goto(${CUT(FAX_DEST,^,1)},${CUT(FAX_DEST,^,2)},${CUT(FAX_DEST,^,3)}) [extensions_additional.conf:4149] 'h' => 1. Hangup() [extensions_additional.conf:4192] 'hang' => 1. Playback(vm-goodbye) [extensions_additional.conf:4194] 2. Hangup() [extensions_additional.conf:4195] 'i' => 1. Set(INVALID_LOOPCOUNT=$[${INVALID_LOOPCOUNT}+1]) [extensions_additional.conf:4173] 2. GotoIf($[${INVALID_LOOPCOUNT} > 3]?final) [extensions_additional.conf:4174] 3. Set(IVR_MSG=no-valid-responce-pls-try-again&custom/client_main) [extensions_additional.conf:4175] 4. Goto(s,start) [extensions_additional.conf:4176] [final] 5. Playback(no-valid-responce-transfering) [extensions_additional.conf:4177] 6. Goto(app-blackhole,hangup,1) [extensions_additional.conf:4178] 'return' => 1. Set(_IVR_CONTEXT=${CONTEXT}) [extensions_additional.conf:4187] 2. Set(_IVR_CONTEXT_${CONTEXT}=${IVR_CONTEXT_${CONTEXT}}) [extensions_additional.conf:4188] 3. Set(IVR_MSG=custom/client_main) [extensions_additional.conf:4189] 4. Goto(s,start) [extensions_additional.conf:4190] 's' => 1. Set(TIMEOUT_LOOPCOUNT=0) [extensions_additional.conf:4151] 2. Set(INVALID_LOOPCOUNT=0) [extensions_additional.conf:4152] 3. Set(_IVR_CONTEXT_${CONTEXT}=${IVR_CONTEXT}) [extensions_additional.conf:4153] 4. Set(_IVR_CONTEXT=${CONTEXT}) [extensions_additional.conf:4154] 5. Set(__IVR_RETVM=) [extensions_additional.conf:4155] 6. GotoIf($["${CHANNEL(state)}" = "Up"]?skip) [extensions_additional.conf:4156] 7. Answer() [extensions_additional.conf:4157] 8. Wait(1) [extensions_additional.conf:4158] [skip] 9. Set(IVR_MSG=custom/client_main) [extensions_additional.conf:4159] [start] 10. Set(TIMEOUT(digit)=3) [extensions_additional.conf:4160] 11. ExecIf($["${IVR_MSG}" != ""]?Background(${IVR_MSG})) [extensions_additional.conf:4161] 12. WaitExten(10,) [extensions_additional.conf:4162] 't' => 1. Set(TIMEOUT_LOOPCOUNT=$[${TIMEOUT_LOOPCOUNT}+1]) [extensions_additional.conf:4180] 2. GotoIf($[${TIMEOUT_LOOPCOUNT} > 3]?final) [extensions_additional.conf:4181] 3. Set(IVR_MSG=no-valid-responce-pls-try-again&custom/client_main) [extensions_additional.conf:4182] 4. Goto(s,start) [extensions_additional.conf:4183] [final] 5. Playback(no-valid-responce-transfering) [extensions_additional.conf:4184] 6. Goto(app-blackhole,hangup,1) [extensions_additional.conf:4185] Include => 'ivr-4-custom' [pbx_config] Include => 'from-did-direct-ivr' [pbx_config]

@Dashrender said in Print to CSV:

@scottalanmiller said in Print to CSV:

@Dashrender said in Print to CSV:

@scottalanmiller said in Print to CSV:

@Dashrender said in Print to CSV:

@scottalanmiller said in Print to CSV:

@CCWTech said in Print to CSV:

From what I can tell the program we are using has a built in integration for Excel but you have to have Excel and not something like Libre Office.

Likely using the Excel automation API that is unique.

I spaced this one.

I was thinking the application could be lame and trying to call the excel.exe executable directly. That could be solved with a link to LibreOffice executable - assuming the LibreOffice executable accepts the same arguments.

In theory, yes. But I think it is using an API to make it output to CSV. Otherwise, we'd just expect it to open the file and sit there.

I assume then that using the API is easier than the application simply outputing to CSV on it's own?

I doubt it.

sooooo... they did it why? bad programmers?

Always, or they just hate the users. But the latter would be crazy.

@G-I-Jones said in KVM USB Wake Issues:

@IRJ I know right. The powers that be on the gov network said they won't allow it.

The upside then, is, that you have someone to blame and say "this is how it works, this was their decision to have this issue." Wash hands, walk away.

@bnrstnr said in Upgrading Nextcloud via CLI:

@JaredBusch said in Upgrading Nextcloud via CLI:

If you change the entire folder to HTTPD_RW it will work without disabling things.

Ah yeah, probably this. SELinux is a complete mystery to me :man_shrugging:

ls -lashZ /var/www/html Will show you the context on your Nextcloud folder. Technically, just the Z is for the context

@dbeato said in Rocket.Chat: No notifications on new message:

@dafyre said in Rocket.Chat: No notifications on new message:

t installed or are you just using the browser

I had the same problem before even with this settings but I recall @scottalanmiller saying it was fixed.

Mine was fixed by the way.

@black3dynamite said in Pros and cons running local repository (for packages like deb, rpm etc)?:

@Pete-S said in Pros and cons running local repository (for packages like deb, rpm etc)?:

Cons would be storage space - amd64 repository for debian stable is around 60 GB.

According to the information in this link, which is updated daily, amd64 is 330 GB.
https://www.debian.org/mirror/size

It's because that includes everything like testing, unstable, experimental and what not. Also source code. So it's a couple of different versions of the OS.

The amd64 stable main contrib non-free are 60.1 GB today - as of right now...

@Dashrender think of this as XOCE to XenServer/XCP-ng but with a desktop instead of a web interface.

Literally nothing different and is completely normal.

@gap579137 said in Add porn blocking to your Pi-hole:

We have a very good list at [site redacted] if you would like to at it to you lists.

Interesting concept..
491adb7c-e991-4b5a-bb1c-0ff38aee2d06-image.png

@vpr00 said in MeshCentral Performance Testing:

Sometimes after i press connect, half of the image loads and it wont load any further. I have to press disconnect and connect again until it works. Have you experienced the same? It only happens with WebRTC though.

Yes, we do see that from time to time.