@360col Thanks for the feedback. I'll know more next week.

@dustinb3403 said in Getting PowerShell to provide me the EventLog details in an email:

Yup. . . I'm an idiot lol. I set it to only look back 1 day and email me those results within the past day.

This obviously would show blank results, since there are no 2013 events within the past day!

Ha ha ha. Whoops!

@siringo said in Fedora name resolution:

Thank you all for your help with this problem.

I had this problem at a site I work at once a week. I went back there yesterday and things worked without me having to do anything so I don't know what was going on.

Anyway, all fixed & once again thanks.

Yeah we have a pretty big .local and I've never had to change anything for it.

Hopefully it stays working for you.

I got the PPD to work, gods that is annoying (Canon) and their crappy driver support. .

@pete-s said in Advantages of CentOS or Fedora over Debian?:

Looking at CentOS / RHEL they seem they use a very old kernel 3.10, even in the latest release, which itself was released recently.

How does that work with hardware support? Do Red Hat backport all new hardware support from the newer kernels to 3.10? If you for instance are setting up a new server with AMD Epyc CPUs, you'll need support for this in the kernel.

There point releases normally include new hardware support.

With Firefox you have enabled Digital Rights Management (DRM) in settings.

@networknerd said in Server 2016 Redirected Printer Change:

That's a new one I have not seen. We used Epicor ERP 10, and in that product I did see issues with RemoteApp where from time to time the user would not have a default printer selected in Epicor (sounds weird, I know), which would then crash any report they tried to print with an error that value of -1 was not allowed. Getting the user to change the printer to something in their list was the workaround.

Thanks for capturing this. I bet it will help someone else and looks to be already doing so.

YEah, that is what happens for this case, the RemoteApp shows the printer as a question mark. Once you go to File, Printer Setup and DoubleClick the printer then it is all good for the printer but all reporting shows in Portrait mode instead of Landscape mode.

@nadnerb said in Fedora in Hyper-V on Windows 10 Possible?:

As unhelpful as it it... "mine works fine"

If you attempt a boot without the ISO, do you get the "insert boot media..." message?
Have you run a checksum comparison on the ISO file?

No & no to that mate.

I thought all was OK, but alas, no. It installs OK, but when it reboots post install it just hangs and never gets to the GUI.
I've downloaded another ISO, so I'll give that a go.
It is helpful to know that it does work, I must just have to iron out some bugs on my system.

I ended up with this: https://www.synology.com/en-us/dsm/feature/cloud_sync

I synced a couple of folders on the NAS/OneDrive/Google Drive/Dropbox/B2.

@obsolesce said in Windows 10 Pro not showing up in network:

@dashrender said in Windows 10 Pro not showing up in network:

@wrcombs said in Windows 10 Pro not showing up in network:

@obsolesce said in Windows 10 Pro not showing up in network:

@jaredbusch said in Windows 10 Pro not showing up in network:

@wrcombs said in Windows 10 Pro not showing up in network:

@jaredbusch said in Windows 10 Pro not showing up in network:

@wrcombs said in Windows 10 Pro not showing up in network:

Although I'm sure Jared wasnt referring to me.

Yes I was.

Ah okay. Well looks like you have half of the issue fixed. However Ill look into why its not showing up.

Since I know you deal with workgroup POS systems, I thought you might have an idea.

I know you complain about XP and I am on current WIndows 10, but still a chance..

XP was decent... it usually just worked. Win10... lol.

Most problems we have is Xp not talking to Windows 10...

Windows 10 hasn't been a huge problem for us (well me) since i started

XP will have a SMB v1 issue with Windows 10.

Then don't use Win10!

FTFY

@wrx7m said in Edge crash:

@black3dynamite said in Edge crash:

@dashrender said in Edge crash:

@ambarishrh said in Edge crash:

@wrx7m said in Edge crash:

@ambarishrh said in Edge crash:

@dashrender said in Edge crash:

Ug.. upgrades... what other software do you have installed?

Can you skip 1709 and go to 1803?

Will try this today

Be warned... 1803 has its own set of weird issues. 😐

Need to make few changes on our AV as well (an upgrade to support 1803), so it might take some time for me to complete the test

My AV just updated for 1709, and now they are back to having issues with 1803.

We’ve been pretty lucky with our Sophos.

Sophos endpoint?

Yes

@jaredbusch said in Point to Point radios - Payment card processing:

@coliver said in Point to Point radios - Payment card processing:

@scotth said in Point to Point radios - Payment card processing:

Access points will work fine. I'm doing discovery. Is there an application that requires that I use point to point vs APs that I lock down? Reminder: I may end up confronted with PCI issues down the road. For now, we'll be processing privately issued cards. If we move to fleet cards issued nationally, then I want to be thorough before we settle on a solution. I will never get a second chance correct without a lot of grief.
BTW, this is for a convenience store that has a 'captive' island for diesel sales to privately issued card holders.

Providing the channel is encrypted with a reasonably strong cipher you should be good with PCI.

WUT?

Your AP channel has nothing to do with the data processing encryption.

You software should be all self encrypting before shit ever hits the transmission.

You can send CC over whatever you want as long as you prove the encryption happened somewhere. Granted most PCI talk about using TLS because they are just using standards. But again, that has nothing to do with the AP.

Right - sad thing is so many places make these ridiculous claims that the machines and network need to be completely separate from anything else on the world to be sure they are secure.

@black3dynamite said in CTRL-ALT-END in Fedora 28:

Ctrl+Alt+End does nothing using Gnome w/ Wayland.

That's true

@samsmart84 said in FreePBX inbound call issue:

But that is for people that want to be PBX people.

Yeah I mainly just want something simple and stable at this point

I'll put in a vote for 3CX then.

Easy to use, professional looking do-it-all web GUI. Very easy to install, good user forum. Free license for small installations.

We run it on a linux VM and it has been working great. 3CX also have good client software for Windows/Mac/Android/iOS that integrates well with the PBX. Otherwise we use Yealink phones.

Here is the page where you find the linux stuff:
https://www.3cx.com/phone-system/asterisk/

@scottalanmiller said in Spiceworks Platform API Removal:

@computerchip said in Spiceworks Platform API Removal:

Am I missing something here? The article you linked states: "When are these changes happening?
Monday, August 28, 2017."

@scottalanmiller said in Spiceworks Platform API Removal:

https://community.spiceworks.com/topic/2026938-removing-platform-apps-from-the-spiceworks-app-center

They just pushed out the notice. All I know is that my customers go this on that day as a big warning.

This has been said in a long time ago although it is shown now but it was a long time ago 😕

@nerdydad said in Nextcloud 13 workflows:

@wirestyle22 said in Nextcloud 13 workflows:

@nerdydad It can't, but it's been a proposed enhancement for awhile now. You could share the file and link it in the calendar event description, but it's really, really ugly and not very useful.

That is unfortunate. Are there other alternatives that will do the same thing?

Not as far as I know, at least within Nextcloud

Have you tried talking to Xarios or Mitel?

@dafyre said in Mapping OneDrive Business to a drive letter:

@nerdydad said in Mapping OneDrive Business to a drive letter:

@phlipelder said in Mapping OneDrive Business to a drive letter:

@nerdydad That's not for the user. That's for the admin who then delivers that via whatever management solution they use.

Quick Access/Favorites can be Group Policy managed so all or some domain members can get it easily.

For external users it's a two step process to send them a shortcut and they know how to log on from there.

There are 4 RDP servers, brokered together for our ERP system, along with all of the off-chutes that some users will have with some other servers for whatever reason, plus their desktop, for 130 users.

I find the most difficult part of managing an RDP farm is getting the apps themselves to play nicely. I've only had a couple of apps that just flat out refused to work correctly.

Since this is all virtualized, I'll just take one server, sysprep it, shut it down, and then just clone it. Apps are all the exact same. The only thing that needs to change are the UUID's and the database.

@jaredbusch said in Unifi Video:

I recently discovered Wyze. https://wyzecam.com

These are fucking awesome.

That is an awesome find.

@fateknollogee Agreed. Always good to layout what is available, let the people make a choice as to what is right for their situation.