Install Zabbix on CentOS 7

Sparkum

@Romo

Sorry just a screenshot of my dashboard?

Yep, host is enabled.

I'm getting stats from the Zabbix agent, just now windows agent.

Romo

@Sparkum So its working now, right?

wirestyle22

I'm going to try this tonight.

Sparkum

@Romo

Zabbix is working, zabbix agent on the server is working, just cant get any communication from windows agent, so not sure if you have any experience with the windows agent or not.

dafyre

@Sparkum said in Install Zabbix on CentOS 7:

@Romo

Zabbix is working, zabbix agent on the server is working, just cant get any communication from windows agent, so not sure if you have any experience with the windows agent or not.

Have you checked the windows firewall? There's Zabbix is usually blocked by it.

Also, check the zabbix_agentd.conf file on your Windows box and make sure the Server and ServerActive IP addresses are set to your Zabbix Server's ip?

Sparkum

@dafyre

Both are set to 192.168.1.167 (which is internal IP of zabbix server)

And I created inbound and outbound rules for 10050 and 10051

dafyre

@Sparkum said in Install Zabbix on CentOS 7:

@dafyre

Both are set to 192.168.1.167 (which is internal IP of zabbix server)

And I created inbound and outbound rules for 10050 and 10051

Got the 10050 and 10051 open on your Zabbix server?

Sparkum

@dafyre

Well I did this

firewall-cmd --permanent --add-port=10051/tcp
firewall-cmd --permanent --add-port=10050/tcp

So I assume yes?

How exactly would I check, sorry

dafyre

@Sparkum said in Install Zabbix on CentOS 7:

@dafyre

Well I did this

firewall-cmd --permanent --add-port=10051/tcp
firewall-cmd --permanent --add-port=10050/tcp

So I assume yes?

How exactly would I check, sorry

Did you

firewall-cmd --reload ?

Edit: That's a good question... I'm not sure about how to do that with firewalld.

Sparkum

@dafyre

Yep I've reloaded and rebooted.

Romo

@dafyre said in Install Zabbix on CentOS 7:

@Sparkum said in Install Zabbix on CentOS 7:

@dafyre

Well I did this

firewall-cmd --permanent --add-port=10051/tcp
firewall-cmd --permanent --add-port=10050/tcp

So I assume yes?

How exactly would I check, sorry

Did you

firewall-cmd --reload ?

Edit: That's a good question... I'm not sure about how to do that with firewalld.

sudo firewall-cmd --permanent --list-all

Sparkum

@Romo

sparkum@Zabbix:~$ sudo firewall-cmd --permanent --list-all
public (default)
interfaces:
sources:
services: dhcpv6-client ssh
ports: 10050/tcp http/tcp 10051/tcp
masquerade: no
forward-ports:
icmp-blocks:
rich rules:

Romo

@Sparkum Your ports are open

Sparkum

Anyone have anymore ideas on what I should try to get the windows agent to communicate with my server?

Want any config files?

Romo

@Sparkum yes post your windows agent config.

Sparkum

@Romo

https://www.dropbox.com/s/23eek30r787pa1e/zabbix_agentd.txt?dl=0

Romo

@Sparkum Finally got a windows vm setup and got the agent working.

alt text

This are the steps I took to get it working:

Download windows pre-compiled agent:
http://www.zabbix.com/downloads/3.0.0/zabbix_agents_3.0.0.win.zip

From an elevated cmd promt
I went inside the extracted folders to install the zabbix agent as a service:
zabbix_agents_3.0.0.win\bin\win64\

Executed the following command to install the service and point to the config file:
zabbix_agent_d.exe --config "..\..\conf\zabbix_agentd.win.conf" --install

Now we need to edit the config file to point to our zabbix server:
zabbix_agents_3.0.0.win\conf\zabbix_agentd.win.conf

Modify the following options:

Server=Zabbix Server IP Address
ServerActive=Zabbix Server IP Address
Hostname= FQDN of windows host

Went back to the bin folder and started the service:
..\zabbix_agents_3.0.0.win\bin\win64\zabbix_agent_d.exe --start

Allow the zabbix_agentd.exe executable throught the windows firewall.

Add the host to the Zabbix Server
alt text

In new host settings add:

# HOST TAB 
Host name = FQDN of your windows host
Groups = Use a preset group or create a new one
Agent Interfaces = IP address of Windows Host
Enabled =  Checked.

#Templates Tab
Link new templates = Template OS Windows

Save your newly created host and wait for a couple of minutes to get it talking to your server
alt text

Its done and reporting =).
alt text

Sparkum

@Romo

I'm getting closer!

So the only thing I did from what you wrote was

Hostname= FQDN of windows host

But after that I have a red Z!
Progress!

Currently getting

 Get value from agent failed: ZBX_TCP_READ() failed: [104] Connection reset by peer

I'll try to google my way through that now!

Thanks

JaredBusch

I just upgraded my install from Zabbix 3.0.5 to 3.2.1 painlessly.

yum -y install http://repo.zabbix.com/zabbix/3.2/rhel/7/x86_64/zabbix-release-3.2-1.el7.noarch.rpm
yum clean all
yum -y upgrade

Only poked around a little but everything seems to be working.

I only have 6 devices reporting in on this for the moment. Been meaning to get this fully functional for months now.

hobbit666

@JaredBusch said in Install Zabbix on CentOS 7:

I only have 6 devices reporting in on this for the moment. Been meaning to get this fully functional for months now.

Same here I really need to wipe mine and re-do it all and get some better info out of it like Performance and IOPS on the servers etc, instead of just ping to see if up or down