@jimmy_k said in Urgent: How to fix this FreePBX Repo Access Issue?:

@jimmy_k Well, I just fixed it
I modified etc/resolv.conf by putting this

nameserver same as DNS1
nameserver same as DNS2

That's what that script is supposed to do. If you did this, it means either you never activated the script or it is broken and will stop working again.

@bbigford said in FreePBX Reload Failed Retreive_Conf Encountered Error 1:

@scottalanmiller said in FreePBX Reload Failed Retreive_Conf Encountered Error 1:

Shut down Asterisk manually, restarted again with fwconsole start. Seems okay now. Odd that a reboot didn't pick that up.

That is weird... Was the service not running after the reboot?

Oh it was running. It just wasn't happy.

@smitherick Thanks for your suggestion

I just tried with Reid method and it is working well. The red notification has been removed

@stuartjordan said in Yealink T19PE2 FreePBX:

I personally like freepbx and will continue using it, the interface is a bit dated I must admit, but that doesn't bother me.

FreePBX interface is definitely dated. But also .... why would the interface ever matter that much? But even if it did, I've used 3CX and their interface was far worse.

@dustinb3403 said in Virtualizing Your Cudatel Appliance:

@scottalanmiller said in Virtualizing Your Cudatel Appliance:

Go ahead, download FreePBX and start playing with it. You could have installed it while reading this article!

Any good installation guides here on ML?

@JaredBusch has a great series of posts for FreePBX here.

https://mangolassi.it/topic/11805/freepbx-13-setup-guide

@bnrstnr said in Weird Network Errors on SIP Trunks, FreePBX:

@scottalanmiller We still use the legacy wholesale thing. It probably wasn't as often as every 3 months, I'm sure I'm exaggerating a little.

Oh okay, that's what we are using, too.

And now it's registered and working. . . wtf. . .

Follow up on this, the user went out and got a new modem. Immediately resolved the issue, so I was never able to test if STUN would have resolved it or not. I'll keep this in mind though for next time.

@jaredbusch said in FreePBX Parking and Web Interface not working:

@bnrstnr said in FreePBX Parking and Web Interface not working:

@JaredBusch Do you recommend sticking with Asterisk 13 on the new install or should I go with 15?

Not tested 15 yet, so I cannot answer that from experience. I can say that I’ve never had a problem caused by Asterisk

Same here, using 13 because FreePBX is recommending it right now. But doubt 15 would be an issue.

@scottalanmiller said in FreePBX 14 Firewall Start Warning:

@jaredbusch said in FreePBX 14 Firewall Start Warning:

@scottalanmiller said in FreePBX 14 Firewall Start Warning:

Well, we are one step newer, so that might be it.

# fwconsole ma list | grep firewall | firewall | 13.0.46.1 | Enabled | AGPLv3+ |

I do not know the CLI command to revert, but it is simple to do in the GUI.

CLick "Check upgrades and then expand the Firewall and you will have a previous versions option.

Tested and you are right, rolling back to 45.5 and the message goes away.

You could upgrade to edge and see if it is different, but I would just wait for the next update.

I would try Linphone and ZoIPer. If neither of those make your users happy, then buy Bria. It is a really nice solution.

Finally got this working, reporting my issues here incase someone with similar issues stumbles upon this thread.

The T54W phones would not download the xml files by https (may be because I do not have a valid certificate setup). I could via the xml files in browser on https but phones would wait awhile and fail.
I am doing auto provisioning via http, but my default admin port was set to 8080. I could not download xml files via http with admin port on 8080.
Once I changed the admin port back to default 80, I was able to download xml files via http.
Phones can now download the php/xml files via http.
I changed permissions for the php files back to rw/rw/r with owner asterisk:asterisk

Auto Provisioning was another headache. Eventually I found out that I had the config settings wrong, was using features.remote_phonebook.data.1.url instead of the correct remote_phonebook.data.1.url

My working basefile edits (using EPM):

directory_setting.remote_phone_book.enable = 1 remote_phonebook.data.1.name = Internal remote_phonebook.data.1.url = http://<pbx-ip>/ylab.php features.remote_phonebook.enable = 1 remote_phonebook.data.2.name = External remote_phonebook.data.2.url = http://<pbx-ip>/cm_to_yl_ab.php

With directory_setting.remote_phone_book.enable = 1
You do not need the favorite_settings.xml to enable the remote directory. But it will put local directory as the first option and remote phonebook as the second option after hitting the directory key.

I have added this code to change the order:

directory_setting.local_directory.priority = 2 directory_setting.remote_phone_book.priority = 1

Or to get rid of the local directory

directory_setting.local_directory.enable = 0

Yealink has a Config Parameter Excel file that has all the config parameters and reading it is what lead me to find my mistake.

@smitherick said in FreePBX extensions to Yealink Phone book can someone who knows python make htis better:

Awesome, I wrote our XML remote phonebook by hand with the YeaLink template. This is going to be fun!

Follow this post.
https://mangolassi.it/topic/15759/use-a-php-file-to-create-a-dynamic-yealink-remote-address-book-of-freepbx-extensions

Additionally, I'm looking at the firewall settings

qCbus6z.png

Is this expected? I get the list of my trusted items, it shows an empty list for other, but local, internet, and rejected all provide zero feedback.

I have the Let's Encrypt sites added to local on the same page as I have my trusted sites added, yet they don't show up as seen above.

Thoughts?

This makes me think that I have somehow disabled the local zone

@dashrender said in Yealink T42S Programmable Key - Switch Account:

@travisdh1 said in Yealink T42S Programmable Key - Switch Account:

@jaredbusch said in Yealink T42S Programmable Key - Switch Account:

@travisdh1 said in Yealink T42S Programmable Key - Switch Account:

@dashrender said in Yealink T42S Programmable Key - Switch Account:

@eddiejennings said in Yealink T42S Programmable Key - Switch Account:

@jaredbusch said in Yealink T42S Programmable Key - Switch Account:

@dashrender said in Yealink T42S Programmable Key - Switch Account:

In fact, moving to smartphone apps and no phone might actually be the best solution of all. I guess it would depend upon how much data they use while not in the office.

Not really. They don't work as good as one might hope. It is usually easier for the sales person to jsut call with their mobile. everyone is expected to have one anyway.

Yeah, not that comparing to Altigen is ever valid, but the MaxMobile app is "meh" at best.

Zoiper doesn't work?

Zoiper is just finicky at the best of times, and for whatever reason I've had no luck when on LTE instead of WiFi with it.

I use it regularly on LTE with little problem unless I am driving down 55.

Well, considering Motorola.... I'm going with the whole Lenovo breaking things.

get a real cell phone. 😉

Of course, and asap, but, money 😞

It is really a fantastic piece of software. It blows many of the other options out of the water for a fraction of the price.

You can also no longer place calls from it. That is now a feature request.

@jaredbusch said in Sample Configuration files for Yealink T42S:

@dashrender said in Sample Configuration files for Yealink T42S:

Here are a few settings many people might like. These will present popups on the phone for each thing mentioned.

features.forward_call_popup.enable = 0
features.missed_call_popup.enable = 0
features.text_message_popup.enable = 0
features.voice_mail_popup.enable = 0

That is certainly a case by case group of settings. I have those disabled about half of the time..

Agreed.