Printer Issue
-
Is this printer connected to a Fiery Print server?
-
@dustinb3403 said in Printer Issue:
Is this printer connected to a Fiery Print server?
No, just a normal 2012 R2 print server. Very vanilla.
-
Picture of the print server...
https://silk.com/sites/default/files/products/full/Soy_VVan.png
-
I assume someone has dug through the event logs on this old 2012 r2 server, yes?
-
I had a similar issue with a Cannon before. Check these two things.
- Make sure the printer doesn't require the UFR II driver rather than the PCL or PS.
- Also, I know it sounds dumb but verify the ip settings. I had an issue where the IP was getting dhcp but the default gateway was static and set to itself.
You could also try installing it on your pc (bypassing the printer server) as a test and see if you can get it to print successfully.
Hope that helps.
-
Thank you for the help guys. I am going to get back to this tomorrow. Tonight is gig night!
-
@coliver said in Printer Issue:
@minion-queen said in Printer Issue:
@coliver said in Printer Issue:
Are the printers being pushed out via Group Policy? If that's the case it could be pushing out the incorrect driver.
Wouldn't that affect all the machines though not just these 3 ?
It should yes.
Agreed - but it depends on the GPO update/apply cycle.
-
@mike-davis said in Printer Issue:
If you rolled them with a static address instead of DHCP with a reservation, there is a possibility of a duplicate IP address on the network. That will cause symptoms like you are having.
These printers have been there a while. so - while I agree this is possible, it is unlikely the case.
-
@dustinb3403 said in Printer Issue:
I assume someone has dug through the event logs on this old 2012 r2 server, yes?
Nope -
-
@gjacobse we did actually
But did you find something that we missed?
-
@minion-queen said in Printer Issue:
Ok I finally got a test print to work, from the Print Server it's self.
But still can't print from the desktops.
All the printers that are down are the same model.
This usually happens when Windows 10 or Windows 7 need to update the printer driver once it has been deployed, logoff the user or restart the computer and it should work, to confirm on the status of the printer you can see under File if it says Update Driver needed or something to that effect.
-
Sigh - Well - there's the problem. - well likely anyway.
