@DustinB3403 said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@dbeato said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@DustinB3403 said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@dbeato said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@DustinB3403 said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@dbeato said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@DustinB3403 said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@jmoore said in Konica Minolta BizHub C3850 No Printing on Windows 10:

@Dashrender Got it. Our departments have their own budget so if they want to print color they can but they figured out fast to be responsible for their own paper.

That seems like a bad approach, since any given department could be forced to stop work "because they overran their paper budget".

Usually, they use the code and pin to know where they are using color but otherwise default is to allow b&w to print without a code.

How does the printer know the difference? Black is a color. .

Really?

Yes really, how does a printer know the difference between CMYK and a page which is black and white.

It's an honest question as I don't know how a Pin to "print in color" would affect this the way you described it.

Also to whoever downvoted, not sure why.

Okay, there are different types of print black and white, gray scale and color which uses CMYK , usually on MFP devices they have different toners for esch of those colors plus black. When a job is sent to the printer with the color setting on the driver it then uses those toners while black and white only requests the black toner

None of the explains what I've asked. How does entering a pin, allow someone to print in color? I've always seen Pin or No Pin for all printing.

Nothing I've ever used has offered "pin for color prints only" etc.

It can be for both.

https://forum.xda-developers.com/android/apps-games/galaxy-playstore-alternative-t3739733

@Pete-S Not me. I have no need for top of rack quality gear at any clients.

I generally avoid Dell network hardware just because HP usually has a comparable solution.

@scottalanmiller said in Looking into IP cameras:

@Donahue said in Looking into IP cameras:

I am going to try fedora for the first time (to run zoneminder). What do you guys normally use, workstation or server?

Server.

Use the NetInstall ISO and choose the minimal option during setup. Always.

@roninmage ah I was very confused based on your replies.

An inline device might be a bit easier to handle for transparent proxying.

UBNT Router --> Web Proxy Device --> Rest of the network.

@DustinB3403 said in NextCloud web interface painfully slow:

Only took the better part of a week to get this resolved. . .

haha I honestly didn't even reply to their message until yesterday. The slow resolution was definitely all on me.

Here's an updated shot of glances
2a4ad1f5-2969-4fd6-aeab-bf6cae0ffd43-image.png

@scottalanmiller said in Inventory tools:

@DustinB3403 said in Inventory tools:

@scottalanmiller said in Inventory tools:

@stacksofplates said in Inventory tools:

@DustinB3403 said in Inventory tools:

@stacksofplates I'm not on the team and have no idea.

I know. I'm just saying it appears to have been abandoned. It's been like this for the last couple days I actually looked.

https://sodiumsuite.com/

The platform login for new users and existing users doesn't resolve to the appropriate page. You get a 404.

Yeah, no new customers currently.

Or anyone. I had an account but can't get to anything. The WordPress site is up but Sodium Suite itself is gone.

Slight thread hijack here but I was wondering if anyone used the Yealink BT40 adapter (bluetooth) for T41S/T42S phones and if it worked as expected?

@DustinB3403 said in Windows Server 2012 Essentials Cannot Find Login Server for AD:

That's rough.

Very

Good to know, I use Ubuntu/Debian so I will check for that.

@JaredBusch said in Domain Time off for some members:

@Donahue said in Domain Time off for some members:

found it. It was the individual time for that ESXi member. It was running on it's own time, neither host time or any NTP. It was off by the 6 minutes. So for some reason, VMWare was syncing this setting with the host's ESXi clock, not the hardware clock, even though the settings disallow that.

How do you know the VMware tools was doing the sync?. As I said in my earlier post if windows goes and tries to get the hardware clock no matter what your tool says for heartbeat or times are pretty station it’s going to get the Clock from the host.

look at the picture I posted above. It was vmtoolsd.exe that was causing it to jump forward and svchost.exe that was correcting it. I found this under event 4616

@JaredBusch said in FreePBX Call Forwarding/Transferring:

@Curtis said in FreePBX Call Forwarding/Transferring:

Can you change the Asterisk Dial Options in a way that isn't system wide? Maybe just allowing it sometimes?

That’s something that can be changed per trunk. So if you craft your rules to send those kind of calls out that trunk that would be the only time it applies.

I was just thinking along those lines Thanks for your help

5B7BC00C-1DE2-4D7B-9C87-F2F8E2904BE0.png 2D2AC216-C76E-4624-9A91-E7D71EC335C0.png 70591281-F424-4DBD-8172-3631E55C8192.png 0680E0E3-8C9B-4584-BB03-243E8F6DB53F.png BFF04DCE-CF78-446E-8A75-549736A9AF76.jpeg BE7DD6AA-EF45-4FCF-8919-E854F9432DF2.png 10B8A26D-023D-4D18-8E50-FFC7904F882A.png BCA16C14-1F22-409D-A085-E316580E48A8.png AB0EAB74-9753-45C1-A2B9-7C319A94E16E.png 7924DE46-0B92-4D8A-B57E-4C352408A767.png AAC75074-19D2-47C8-90CA-0CC2B1AD94CD.png 9E7D961C-D913-4409-B73F-F4AA1C8AEAFF.png 9FF7C4BE-792F-4FF3-8C92-F9B2EE81C626.png

so what we did was 3 step process - put the extension number on first alternative, another on second alternative, edit the call re-routing for the said extension number pointing to the line of 1st and 2nd alternative. we use the current timer but instead of going to VM it goes to the alternatives.

@NerdyDad said in SaltStack - Viewing output:

Disclaimer: I've never implemented or used SaltStack at all.

But what I know of it, I would treat it similar to Group Policy. Not really meant to give information back. Just a state and configuration management system.

Agreed. I'm not looking to use it for advanced monitoring, only basic disk usage, etc.

@scottalanmiller Yeah I check daily for updates to make sure my things are up to par and was surprised when I saw such a huge list of updates waiting.

@gjacobse said in Fedora: Support for Hauppauge?:

Well - unless it's in there some where,.. the Official support page for Hauppauge states that they Support Ubuntu - ... So, It would seemingly be that here is another device I am unable to run under Fedora...

Or - Is that true?

@scottalanmiller - Is there options for running the WinTV-HVR 950q USB TV Stick in Fedora - or am I looking at either;

dual booting going Ubuntu only going back to Windows -

Whats wrong with Ubuntu, I rarely see the difference nowadays between Ubuntu and Fedora, both are great. And trust me there are no apps in Fedora that are not In Ubuntu actually it is the opposite

@Dashrender said in ScreenConnect Update Errors on Fedora 28 ScreenConnect_6.8.20124.6845:

@JaredBusch said in ScreenConnect Update Errors on Fedora 28 ScreenConnect_6.8.20124.6845:

Just upgraded to 6.9 and had the same error. Fedora 29 base.

Reran the upgrade with the export and it worked without error.

rolled back and reran it or just ran the upgrader over the last not so great upgrade?

Just ran over it. Same as I did the prior time also.

I’ve only witnessed that with Firefox on Gnome3 Wayland and xorg.