ML
    • Recent
    • Categories
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    ATA on Skyetel???

    IT Discussion
    4
    13
    668
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      JasGot
      last edited by

      New ATA issue today.
      I have a 191-MPP from Cisco. I need it for an audio recording that dials out when a door is opened after hours.

      I have the ATA registered to Skyetel as an ATA with SIP Credentials.

      I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

      When I call the ATA, the connected device answers, but when I speak to it, no audio is heard at the connected device.

      I may have two issues.

      So if we start with the most important one, why does the ATA get fax tomes when it dials a cell ph0ne number?

      JaredBuschJ J scottalanmillerS 3 Replies Last reply Reply Quote 0
      • JaredBuschJ
        JaredBusch @JasGot
        last edited by

        @JasGot said in ATA on Skyetel???:

        So if we start with the most important one, why does the ATA get fax tomes when it dials a cell ph0ne number?

        Are you sure you set this all up right?
        You created SIP registration credentials correctly?
        Device is registered?
        Inbound TN is routed correctly to the SIP Credential Endpoint?

        J 1 Reply Last reply Reply Quote 0
        • J
          JasGot @JaredBusch
          last edited by

          @JaredBusch said in ATA on Skyetel???:

          @JasGot said in ATA on Skyetel???:

          So if we start with the most important one, why does the ATA get fax tomes when it dials a cell ph0ne number?

          Are you sure you set this all up right?
          You created SIP registration credentials correctly?
          Device is registered?
          Inbound TN is routed correctly to the SIP Credential Endpoint?

          I'm pretty certain. It was registered. When I called the number the device attached to the ATA rang. When I answered it, it stopped ringing but I could not hear any conversation.

          When I dial out from the ATA, I hear fax tones.
          I think I need to ask Skyetel to disable T.38 for this number, but I fear they will just say, "We don't support that".

          JaredBuschJ 2 Replies Last reply Reply Quote 0
          • J
            JasGot @JasGot
            last edited by

            It started working after a factory reset on the ATA.

            1 Reply Last reply Reply Quote 0
            • JaredBuschJ
              JaredBusch @JasGot
              last edited by

              @JasGot said in ATA on Skyetel???:

              When I dial out from the ATA, I hear fax tones.

              That would be really weird. I guess I misread what you wrote above.

              1 Reply Last reply Reply Quote 0
              • JaredBuschJ
                JaredBusch @JasGot
                last edited by

                @JasGot said in ATA on Skyetel???:

                I think I need to ask Skyetel to disable T.38 for this number

                That is a protocol and has nothing to do with what happens on a call.

                1 Reply Last reply Reply Quote 0
                • scottalanmillerS
                  scottalanmiller @JasGot
                  last edited by

                  @JasGot said in ATA on Skyetel???:

                  I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                  Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                  DashrenderD 1 Reply Last reply Reply Quote 0
                  • DashrenderD
                    Dashrender @scottalanmiller
                    last edited by

                    @scottalanmiller said in ATA on Skyetel???:

                    @JasGot said in ATA on Skyetel???:

                    I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                    Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                    Well, at least not normally. 🙂
                    with their fax service they will.

                    scottalanmillerS 1 Reply Last reply Reply Quote 0
                    • scottalanmillerS
                      scottalanmiller @Dashrender
                      last edited by

                      @Dashrender said in ATA on Skyetel???:

                      @scottalanmiller said in ATA on Skyetel???:

                      @JasGot said in ATA on Skyetel???:

                      I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                      Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                      Well, at least not normally. 🙂
                      with their fax service they will.

                      Outbound?

                      DashrenderD 1 Reply Last reply Reply Quote 0
                      • DashrenderD
                        Dashrender @scottalanmiller
                        last edited by

                        @scottalanmiller said in ATA on Skyetel???:

                        @Dashrender said in ATA on Skyetel???:

                        @scottalanmiller said in ATA on Skyetel???:

                        @JasGot said in ATA on Skyetel???:

                        I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                        Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                        Well, at least not normally. 🙂
                        with their fax service they will.

                        Outbound?

                        if you buy that service from them - yes. They put a piece of equipment on your network that actually accepts the fax locally, removing the internet from the equation. It then sends a data burst to Skyetel, and then Skyetel puts the call from it's own servers onto the PSTN.

                        scottalanmillerS 1 Reply Last reply Reply Quote 0
                        • scottalanmillerS
                          scottalanmiller @Dashrender
                          last edited by

                          @Dashrender said in ATA on Skyetel???:

                          @scottalanmiller said in ATA on Skyetel???:

                          @Dashrender said in ATA on Skyetel???:

                          @scottalanmiller said in ATA on Skyetel???:

                          @JasGot said in ATA on Skyetel???:

                          I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                          Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                          Well, at least not normally. 🙂
                          with their fax service they will.

                          Outbound?

                          if you buy that service from them - yes. They put a piece of equipment on your network that actually accepts the fax locally, removing the internet from the equation. It then sends a data burst to Skyetel, and then Skyetel puts the call from it's own servers onto the PSTN.

                          What does that have to do with SIP connections, though?

                          DashrenderD 1 Reply Last reply Reply Quote 0
                          • DashrenderD
                            Dashrender @scottalanmiller
                            last edited by

                            @scottalanmiller said in ATA on Skyetel???:

                            @Dashrender said in ATA on Skyetel???:

                            @scottalanmiller said in ATA on Skyetel???:

                            @Dashrender said in ATA on Skyetel???:

                            @scottalanmiller said in ATA on Skyetel???:

                            @JasGot said in ATA on Skyetel???:

                            I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                            Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                            Well, at least not normally. 🙂
                            with their fax service they will.

                            Outbound?

                            if you buy that service from them - yes. They put a piece of equipment on your network that actually accepts the fax locally, removing the internet from the equation. It then sends a data burst to Skyetel, and then Skyetel puts the call from it's own servers onto the PSTN.

                            What does that have to do with SIP connections, though?

                            It doesn't - I was only pointing out - if you get fax service from Skyetel - you can get the fax tones provided by skyetel for outbound faxes... you stated something to the effect that skyetel would never do that - and in fact there are cases where they do.

                            scottalanmillerS 1 Reply Last reply Reply Quote 0
                            • scottalanmillerS
                              scottalanmiller @Dashrender
                              last edited by scottalanmiller

                              @Dashrender said in ATA on Skyetel???:

                              @scottalanmiller said in ATA on Skyetel???:

                              @Dashrender said in ATA on Skyetel???:

                              @scottalanmiller said in ATA on Skyetel???:

                              @Dashrender said in ATA on Skyetel???:

                              @scottalanmiller said in ATA on Skyetel???:

                              @JasGot said in ATA on Skyetel???:

                              I have two issues, when the ATA dials out, it is presented with FAX tones. I think Skyetel is doing this.

                              Try dialing out with a regular SIP phone to test. But Skyetel should never present fax tones outbound.

                              Well, at least not normally. 🙂
                              with their fax service they will.

                              Outbound?

                              if you buy that service from them - yes. They put a piece of equipment on your network that actually accepts the fax locally, removing the internet from the equation. It then sends a data burst to Skyetel, and then Skyetel puts the call from it's own servers onto the PSTN.

                              What does that have to do with SIP connections, though?

                              It doesn't - I was only pointing out - if you get fax service from Skyetel - you can get the fax tones provided by skyetel for outbound faxes... you stated something to the effect that skyetel would never do that - and in fact there are cases where they do.

                              I did. And they don't. Your example makes no sense because I stated that they'd not provide a fax signal outbound on a call. You then stated something unrelated that doesn't have a fax signal. Their service bypasses the call so the situation we are discussing never happens. So in your example case, they still don't do that.

                              1 Reply Last reply Reply Quote 0
                              • 1 / 1
                              • First post
                                Last post